Tags |
|
|
Links |
|
|
Article Check - Debugging NTP Server Installations
Most strategic shoppers rely on grocery coupons to help save on their groceries. However, industry statistics show that a very small percentage of shoppers are heavy grocery coupon users. I have been a "heavy" coupon user for over a decade, and I am used to other shoppers watching me in the checkout line and making comments like, "You sure like coupons, don't you?" I always smile and say, "Actually, I really like money. Using coupons is one way to have more of it!" Best of all, coupons are FREE money. If
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic
The facts are overwhelming, any wholesale DVD list buyer today must be skeptical and with extreme cautious when it comes to pulling out there credit cards. If you want to buy wholesale, you must do your own diligence with a time-tested DVD wholesale list that has the best prices to compete in the current market.If you go to eBay right now and hit a search for: wholesale list, you should get thousands of results. Many confuse and deceive you with real tangible items, they are not- they are informati
This article describes how to debug a NTP server installation after compilation and configuration of the distribution.
NTP Server Debugging
Once the NTP distribution is installed and configured, correct operation needs to be verified. NTP includes a number of tools that can be used to query and debug a NTP server. The most widely used tool is ‘ntpq' – the standard NTP query utility. The ‘ntpq' utility can be run on the NTP Server installation or from any other computer on the network. The utility can be used to inspect NTP Server system variables to verify correct operation.
Using ‘ntpq' – The NTP Query Utility
The ‘ntpq' utility is run from a Linux command prompt. It can be run with a number of command line options. The most useful parameter is the ‘-p' option which display NTP server peer variables. Run the ntpq utility with the –p option, thus:
>ntpq –p 192.168.0.1 # where 192.168.0.1 is the IP address of the NTP server.
If the ntpq utility is run on the NTP server, the IP address may be omitted. Output similar to the information below may be generated.
remote refid st t when poll reach delay offset jitter
=============================================================
*127.127.0.32 .GPS. 1 u 18 64 377 0.000 0.412 0.015
+127.127.0.7 .MSF. 1 u 18 64 377 1.622 0.546 1.125
This first character on the left margin indicates the synchronisation status of each reference peer in the list. The currently selected reference peer is indicated by an asterisk (‘*'). Additional peers marked with a ‘+' are also used in the computation, while peers marked with any other symbol are not used.
The ‘remote' address corresponds to the server or peer entries in the NTP server configuration file. The ‘refid' field indicates the time source utilised by the server. The ‘st' field indicates the stratum, ‘t' indicates type; unicast, multicast or local. The ‘when' field indicates the time since the reference was last contacted. The ‘poll' field indicates the polling frequency of the reference. The ‘delay' field provides the round-trip delay when contacting the reference. The ‘offset' field is the difference between the reference time and the server time. The ‘jitter' field indicates the dispersion of time stamps received from the reference.
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic
Do you want to successfully market your business franchise online? Here's an internet strategy you can use for your franchise opportunity.1. Design a very simple web site.I've visited quite a number of company web sites, and their franchise page is sometimes hidden under layers of beautiful flash pages. If you insist on having a visually attractive web site, go ahead and maintain it. Please consider, however, building a partner web site that contains mostly text and no flash programmi
Using ‘ntpq' – The NTP Query Utility
The ‘ntpq' utility is run from a Linux command prompt. It can be run with a number of command line options. The most useful parameter is the ‘-p' option which display NTP server peer variables. Run the ntpq utility with the –p option, thus:
>ntpq –p 192.168.0.1 # where 192.168.0.1 is the IP address of the NTP server.
If the ntpq utility is run on the NTP server, the IP address may be omitted. Output similar to the information below may be generated.
remote refid st t when poll reach delay offset jitter
=============================================================
*127.127.0.32 .GPS. 1 u 18 64 377 0.000 0.412 0.015
+127.127.0.7 .MSF. 1 u 18 64 377 1.622 0.546 1.125
This first character on the left margin indicates the synchronisation status of each reference peer in the list. The currently selected reference peer is indicated by an asterisk (‘*'). Additional peers marked with a ‘+' are also used in the computation, while peers marked with any other symbol are not used.
The ‘remote' address corresponds to the server or peer entries in the NTP server configuration file. The ‘refid' field indicates the time source utilised by the server. The ‘st' field indicates the stratum, ‘t' indicates type; unicast, multicast or local. The ‘when' field indicates the time since the reference was last contacted. The ‘poll' field indicates the polling frequency of the reference. The ‘delay' field provides the round-trip delay when contacting the reference. The ‘offset' field is the difference between the reference time and the server time. The ‘jitter' field indicates the dispersion of time stamps received from the reference.
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic
Keep the momentum going and don't lose heart. Thomas Edison knew what it was to continue in what he had set out to achieve through action. I love his quote that says, "Genius is 1% inspiration and 99% perspiration." He also said that "Opportunity is missed by most people because it is dressed in overalls and looks like hard work." Here's another one, "The three great essentials to achieving anything worthwhile are; first, hard work, second, stick-to-it-iveness, and third, common sense."In his pursu
If the ntpq utility is run on the NTP server, the IP address may be omitted. Output similar to the information below may be generated.
remote refid st t when poll reach delay offset jitter
=============================================================
*127.127.0.32 .GPS. 1 u 18 64 377 0.000 0.412 0.015
+127.127.0.7 .MSF. 1 u 18 64 377 1.622 0.546 1.125
This first character on the left margin indicates the synchronisation status of each reference peer in the list. The currently selected reference peer is indicated by an asterisk (‘*'). Additional peers marked with a ‘+' are also used in the computation, while peers marked with any other symbol are not used.
The ‘remote' address corresponds to the server or peer entries in the NTP server configuration file. The ‘refid' field indicates the time source utilised by the server. The ‘st' field indicates the stratum, ‘t' indicates type; unicast, multicast or local. The ‘when' field indicates the time since the reference was last contacted. The ‘poll' field indicates the polling frequency of the reference. The ‘delay' field provides the round-trip delay when contacting the reference. The ‘offset' field is the difference between the reference time and the server time. The ‘jitter' field indicates the dispersion of time stamps received from the reference.
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic
Are Australian-two-up systems worth the sometimes high costs involved to join?Australian-two-up systems are springing up more and more on the Internet these days. The reason, in part, is due to the fact that this type of home based business can be conducted very effectively using recently developed online marketing tools such as flash videos, embedded audios, videoconferencing, etc.But here's the rub, they can cost anywhere from $200 to $7,500 to join.Are they worth it?Well, t
The ‘remote' address corresponds to the server or peer entries in the NTP server configuration file. The ‘refid' field indicates the time source utilised by the server. The ‘st' field indicates the stratum, ‘t' indicates type; unicast, multicast or local. The ‘when' field indicates the time since the reference was last contacted. The ‘poll' field indicates the polling frequency of the reference. The ‘delay' field provides the round-trip delay when contacting the reference. The ‘offset' field is the difference between the reference time and the server time. The ‘jitter' field indicates the dispersion of time stamps received from the reference.
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic
Futures trading is a financial arrangement, also called a forward contract. A futures contract is an undertaking by a seller to provide a commodity or any other pre-decided asset on a pre-determined date to the buyer. The commodities that are usually traded in this manner are edibles such as wheat and sugar. Stock market indexes, government bonds and foreign currencies are also traded in this manner.Futures trading system is a strategic system, laid out in a logical manner to plan trading. When tra
In the event of problems synchronising to a reference peer, a four-character status string is entered in the ‘refid' field. The status fields may consist of one of:
ACST - The association belongs to a anycast server.
AUTH - Server authentication failed.
AUTO - Autokey sequence failed.
BCST - The association belongs to a broadcast server.
CRYP - Cryptographic authentication or identification failed. The details should be in the system log file or the cryptostats statistics file, if configured. No further messages will be sent to the server.
DENY - Access denied by remote server. No further messages will be sent to the server.
DROP - Lost peer in symmetric mode. Please wait while the association is restarted.
RSTR - Access denied due to local policy. No further messages will be sent to the server.
INIT - The association has not yet synchronized for the first time.
MCST - The association belongs to a manycast server.
NKEY - No key found. Either the key was never installed or is not trusted.
RATE - Rate exceeded. The server has temporarily denied access because the client exceeded the rate threshold.
RMOT - Somebody is tinkering with the association from a remote host running ntpdc. Not to worry unless some rascal has stolen your keys.
STEP - A step change in system time has occurred, but the association has not yet resynchronized.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.caseupon.com/article/168827/caseupon-Debugging-NTP-Server-Installations.html">Debugging NTP Server Installations</a>
BB link (for phorums):
[url=http://www.caseupon.com/article/168827/caseupon-Debugging-NTP-Server-Installations.html]Debugging NTP Server Installations[/url]
Related Articles:
The Secret to Building a Profitable List
Low Investment Business Opportunity-Making Big Money Within 12 Months
Bookmark it:
|