Article Check
#1 in Business Subscribe Email Print

You are here: Home > Business > Business > Quality Control Aspects Of Garment Exports

Tags

  • retail
  • tools
  • finished
  • places difference
  • unreliable supplies
  • however quality

  • Links

  • Getting Read, Reviewed and Rated - Are You Ready?
  • Tee Off With Disc Golf at the Top of the Rockies
  • The Differences Between Web Design and Printing Media Design
  • Article Check - Quality Control Aspects Of Garment Exports

    The Tortoise and the Hare Model for Successful Small Business Start Ups
    My mother used to affectionately refer to me as a turtle because at swim lessons, while the other kids eagerly jumped right into the pool ready to start, I stood near the edge, waiting. I wasn't afraid of the water. Rather, I was taking time to prepare for the event. Then, when I was good and ready, I jumped right in and swam.Thus began my relationship with the fable "The Tortoise and the Hare" found in the much beloved bedside collection The Fables of Aesop. "The Tortoise and the Hare" is perfect for illustrating sound start up practices.Aesop's The Tortoise and the HareOnce upon a time, there was a hare who, boasting that he could run faster than anyone else, was forever teasing tortoise about his slowness. Then one day, the irate tortoise accepted the challenge when the hare boasted that "there was no one in the world who could beat him in a race."The next day the race began, and the hare yawned sleepily as the meek tortoise trudged slow
    ce of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk ga

    Using Influence To Get What You Want
    The Law of Social Proof. The Law of Authority. The Law of Contrast. Do these terms mean anything to you? They will in a moment!You won't find these laws in your country's Constitution or legal writings, but whether you realize it or not they affect your life every day. That's because these laws are being used to influence your thoughts and actions all the time, without your even realizing it.We all know, of course, that the advertising industry is constantly "pushing our buttons" --- that's how they persuade us to buy the goods and services they are selling. We accept that. Sometimes we are aware of the tactics and consciously decide whether or not to respond, but for most of the time we're oblivious to them. We simply react, and very often with the desired response --- THEIR desired response!These laws are psychological laws, and they work because we human beings are remarkably predictable. We may be different from each other in our personalities, our
    Introduction

    For every industry or business, to get increased sales and better name amongst consumers and fellow companies it is important to maintain a level of quality. Especially for the businesses engaged in export business has to sustain a high level of quality to ensure better business globally. Generally quality control standards for export are set strictly, as this business is also holds the prestige of the country, whose company is doing the export. Export houses earn foreign exchange for the country, so it becomes mandatory to have good quality control of their products. In the garment industry quality control is practiced right from the initial stage of sourcing raw materials to the stage of final finished garment. For textile and apparel industry product quality is calculated in terms of quality and standard of fibres, yarns, fabric construction, colour fastness, surface designs and the final finished garment products. However quality expectations for export are related to the type of customer segments and the retail outlets.

    There are a number of factors on which quality fitness of garment industry is based such as - performance, reliability, durability, visual and perceived quality of the garment. Quality needs to be defined in terms of a particular frame¬work of cost. The national regulatory quality certification and international quality programmes like ISO 9000 series lay down the broad quality parameters based on which companies maintain the export quality in the garment and apparel industry. Here some of main fabric properties that are taken into consideration for garment manufacturing for export basis:

    . Overall look of the garment.
    . Right formation of the garment.
    . Feel and fall of the garment.
    . Physical properties.
    . Colour fastness of the garment.
    . Finishing properties
    . Presentation of the final produced garment.

    Sourcing of Fabrics

    There are certain problems that could be faced by garment manufacturers when sourcing for certain fabrics, so precautions should be taken for it beforehand to minimize the problems. The garment exporters source cotton fabrics mainly from handloom sectors, powerlooms and mills. Each of these sectors presents their own unique set of problems to the garment exporters. Sourcing cotton from handloom sectors might present some set of problems like colour variation, missing ends and picks, irregular weaves and unreliable supplies. However, the handloom sector is significant source of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk gar

    Medical Billing - The Support Tech's Troubles
    If you think that the programmer has nightmares trying to get a piece of medical billing software to work correctly and the QA tech has headaches trying to test this software under every possible condition, imagine the troubles that the support tech has when he is basically stuck in the middle of this no win battle. In this installment, we're going to show you just what the support tech has to go through on a daily basis.The biggest problem that the support tech has is that they are basically the last one to find out what the software does and the first line of defense when it comes to taking support calls. This gives them the least amount of time to prepare what is inevitably going to come down the pike. Need an example? Here's a perfect one.The DME medical billing software company decides to add barcoding to their line of products. So the hardware department makes the barcoding machines that will actually read these barcodes. The printing department m
    is practiced right from the initial stage of sourcing raw materials to the stage of final finished garment. For textile and apparel industry product quality is calculated in terms of quality and standard of fibres, yarns, fabric construction, colour fastness, surface designs and the final finished garment products. However quality expectations for export are related to the type of customer segments and the retail outlets.

    There are a number of factors on which quality fitness of garment industry is based such as - performance, reliability, durability, visual and perceived quality of the garment. Quality needs to be defined in terms of a particular frame¬work of cost. The national regulatory quality certification and international quality programmes like ISO 9000 series lay down the broad quality parameters based on which companies maintain the export quality in the garment and apparel industry. Here some of main fabric properties that are taken into consideration for garment manufacturing for export basis:

    . Overall look of the garment.
    . Right formation of the garment.
    . Feel and fall of the garment.
    . Physical properties.
    . Colour fastness of the garment.
    . Finishing properties
    . Presentation of the final produced garment.

    Sourcing of Fabrics

    There are certain problems that could be faced by garment manufacturers when sourcing for certain fabrics, so precautions should be taken for it beforehand to minimize the problems. The garment exporters source cotton fabrics mainly from handloom sectors, powerlooms and mills. Each of these sectors presents their own unique set of problems to the garment exporters. Sourcing cotton from handloom sectors might present some set of problems like colour variation, missing ends and picks, irregular weaves and unreliable supplies. However, the handloom sector is significant source of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk ga

    Yes - You CAN Compete with Offshore - Part II
    IN PART 1 of this two part article, we looked at Quality of the Product and Friendliness of the Service. In Part 2 we will consider alignment to particular requirements, responsiveness to needs, ability to deliver to schedule, and cost to the purchaser. Let’s get started.ALIGNMENT TO REQUIREMENTSA big part of competitiveness is found in the alignment of the product to the customer’s requirements -- if it does what it’s supposed to do, they’re gonna consider buying it. This was discussed back in Quality of the Product, but it also means that you, as the producer, have to consider needs that the customer has in keeping his/her own costs down. You will have done that, of course, when you set up initial sales with the client, but it should be done on an ongoing basis, too.RESPONSIVENESS TO NEEDSDo you know what your customer is dealing with, and what new challenges are being faced by that company? Worthington Steel, based out of Columbus, Ohio
    ined in terms of a particular frame¬work of cost. The national regulatory quality certification and international quality programmes like ISO 9000 series lay down the broad quality parameters based on which companies maintain the export quality in the garment and apparel industry. Here some of main fabric properties that are taken into consideration for garment manufacturing for export basis:

    . Overall look of the garment.
    . Right formation of the garment.
    . Feel and fall of the garment.
    . Physical properties.
    . Colour fastness of the garment.
    . Finishing properties
    . Presentation of the final produced garment.

    Sourcing of Fabrics

    There are certain problems that could be faced by garment manufacturers when sourcing for certain fabrics, so precautions should be taken for it beforehand to minimize the problems. The garment exporters source cotton fabrics mainly from handloom sectors, powerlooms and mills. Each of these sectors presents their own unique set of problems to the garment exporters. Sourcing cotton from handloom sectors might present some set of problems like colour variation, missing ends and picks, irregular weaves and unreliable supplies. However, the handloom sector is significant source of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk ga

    Business Directory & Guide
    Business Directory or Guide normally come out with printed version (Book) which containing an alphabetical or classified listing of product and services, company name, company address, telephone number, and company advertising.Using Directory, people can find company name and address by searching through product and service name which listed alphabetically. For instance if technician working in an oil refinery plant need to replace some blunt Non-Sparking tools, how would he go about looking for the Non-Sparking Tools?Firstly, he need to open a directory, search for "Tools" classification under 'T' alphabet index. Then under "Tools" Classification, search for "Sparking Tools" Subcategories. And finally from there he could contact the company that selling the product for more details information. It's very easy and fast and take less than a minute to find supplier.Nowadays, Business Directory or Guide come out with 3 main products to help and ease their
    inal produced garment.

    Sourcing of Fabrics

    There are certain problems that could be faced by garment manufacturers when sourcing for certain fabrics, so precautions should be taken for it beforehand to minimize the problems. The garment exporters source cotton fabrics mainly from handloom sectors, powerlooms and mills. Each of these sectors presents their own unique set of problems to the garment exporters. Sourcing cotton from handloom sectors might present some set of problems like colour variation, missing ends and picks, irregular weaves and unreliable supplies. However, the handloom sector is significant source of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk ga

    Microfiber The most Advantageous Fiber Of The Age
    Invention of MicrofiberAfter years of trialing, Dr. Miyoshi Okamoto scientist of Japan at Toray Industries, invented the world's first microfiber in 1970 and later his coworker Dr. Toyohiko Hikota improve a new practice and modify Dr. Okamoto's invention into an remarkable new fabric - Ultrasuede - a non-woven material and the first commercial production of microfiber commenced in 1989, in U.S by E.I. DuPont de Nemours & Company, Inc.Microfibers: Very fine fibersMicrofiber is a variety of polyester that has exclusive and advantageous properties compared to other traditional fibers.Microfibers are heavily formed, polyester and polyamide fibers and are one hundred times finer than human hair. The diameter of microfibers is one-quarter of fine wool, one-third of the cotton, half of a fine silk fiber and the density of the material consent it to grip six to eight times of its weight in water."Denier" is the word used to describe the diameter or fine
    ce of heavier cotton. Common problems faced in powerloom cotton sourcing are broken ends and reed marks, thick and thin places, difference in width and massive variation in costing. The major problem in mill-made fabric sourcing is to meet huge demands from the mills. Fabrics have to be ordered well in advance in mills and the long time taken for producing the fabric is a matter of concern for garment exporters. Mills generally hesitate to take small orders which pose a problem for small scale exporters.

    It is not that sourcing problems which only confined to cotton fabrics, but also to other fabrics as well. In silk garment industry there are some sorts of problems faced by silk garment exporters. Some of the problems that could be faced by silk garment exporters are as follows:

    . Shortage of imported silk yarns in the quantities required, as a result delivery is delayed.
    . Silk material is very vulnerable to stains during manufacturing process as well as stocking, staining results in rejection so a lot of care has to taken during these procedures.
    . Roll length of the silk yarn is often insufficient.
    . Colour fastness of dyed silk material is sometimes not satisfactory.
    . There are also chances of warp breakage.

    Basic Thumb Rules for Garment Exporters

    For a garment exporter there are many strategies and rules that are required to be followed to achieve good business. The fabric quality, product quality, delivery, price, packaging and presentation are some of the many aspects that need to be taken care of in garment export business. Some rules that are advisable for garment exporters are listed below:

    . Quality has to be taken care by the exporter, excuses are not entertained in international market for negligence for low quality garments, new or existing exporters for both it is mandatory to use design, technology and quality as major upgradation tools.
    . Apart from superior quality of the garment, its pricing, packaging, delivery, etc has to be also taken care of.
    . The garment shown in the catalogue should match with the final garment delivered.
    . It is important to perform according to the promises given to the buyer, or else it creates very bad impression and results in loss of business and reputation.
    . In international market, quality reassurance is required at every point.
    . Proper documentation and high standard labels on the garment are also important aspects as these things also create good impression.
    . Timely delivery of garments is as important as its quality.
    . If your competitor has the better quality of garment in same pricing, it is better to also enhance your garment quality.
    . Before entering into international market, garment exporters have to carefully frame out the quality standards, or else if anything goes wrong it could harm the organization. And after that strictly follow it.
    . The garment quality should match the samples shown during taking the orders.
    . The garment exporters should know to negotiate a premium price after quality assurance is done.

    Quality is a multi-dimens

    HTTP = HTML link (for blogs, profiles,phorums):
    <a href="http://www.caseupon.com/article/1914/caseupon-Quality-Control-Aspects-Of-Garment-Exports.html">Quality Control Aspects Of Garment Exports</a>

    BB link (for phorums):
    [url=http://www.caseupon.com/article/1914/caseupon-Quality-Control-Aspects-Of-Garment-Exports.html]Quality Control Aspects Of Garment Exports[/url]

    Related Articles:

    7 Ways to Control Your Direct Selling Appointment Schedule

    What! Business Is Just An Idea?

    Parcel Shipping Services

    Bookmark it: del.icio.us digg.com reddit.com netvouz.com google.com yahoo.com technorati.com furl.net bloglines.com socialdust.com ma.gnolia.com newsvine.com slashdot.org simpy.com shadows.com blinklist.com