Tags |
|
|
Links |
|
|
Article Check - Sharpening The Performance Of Your Band Saw
If you have a Yellow Page ad and think it’s doing it’s job, think again. After all, when was the last time you tracked the results? In fact, before you even placed the ad, did you pass a copy around to employees, friends, relatives and total strangers to get a reaction? That’s your first problem. Then, did you set up a tracking device like a special phone number within the ad to measure the n
Even if you don’t k
Let me give you a brief history of Group Purchasing Organizations (GPO). They have been around for decades. Do you know what types of businesses get the best pricing on all of the goods and services they purchase? The answer is healthcare facilities. Do you know why? I’ll tell you. Nearly any healthcare facility in the nation that is making a profit belongs to a buying group.The ave
There are certain precautions to be taken in order to protect the blades from premature wearing. For example, when the blades are new, they are too sharp, and any rigorous action on it will cause damage to its teeth. In order to avoid premature wear, manufacturers suggest a break-in action for new saw blades. This can be done by reducing the speed of sawing in the initial period, often to half of the normal speed. Reducing the feed quantity in the beginning, say for the first 50 square inches of the material, will also help to wear off the extra sharpness of the blade and will make it more durable.
Even if you don’t kn
Unless you have lived in a cave for the past few years, you have seen them in your community. A group of women over 50 years of age dressed as pimps. Big red hats with feathers, boas draped around their shoulders, purple velvet suits, as gaudy as you can imagine. These ladies are no pimps. They are members of a popular women over-50 group, The Red Hat Society.The Red Hat Society be
There are certain precautions to be taken in order to protect the blades from premature wearing. For example, when the blades are new, they are too sharp, and any rigorous action on it will cause damage to its teeth. In order to avoid premature wear, manufacturers suggest a break-in action for new saw blades. This can be done by reducing the speed of sawing in the initial period, often to half of the normal speed. Reducing the feed quantity in the beginning, say for the first 50 square inches of the material, will also help to wear off the extra sharpness of the blade and will make it more durable.
Even if you don’t k
Starting my own business in February of 2001 at age 39 was among the most optimistic things I have done in my life.Before electing to stay home for a year with my infant son in 1997, I held a variety of corporate marketing management positions. I was accustomed to making big decisions and influencing big outcomes That is why I grew weary of managing the expense side of the household e
Even if you don’t k
When you are in business and considering opening a new factory, industrial unit or business you must be wise as to keep things quiet. Why you ask? Well if you are in a limited industry sub-sector you may find that the equipment makers in the industry have a network and the word spreads like wild-fire in the industry.Let us say you are building a produce processing center? There may be
Even if you don’t k
In today's unpredictable economy, the idea of job security with any company would seem to be a thing of the past. Large company layoffs, golden handshakes, mergers, leveraged buyouts, company acquisitions and similar business moves have left people of all ages out of a job they need to live. While there may be some compensation upon being let go from the firm you work for, this
Even if you don’t know what the normal feed pressure for the material should be, to be safe, start with a light feed, and slowly increase the feed pressure until proper curly chips (in metal) or chip sizes (for wood) are formed. Be aware that there are certain alloys such as ones that are nickel-based which are sawed under lower speeds and so need more break-in pressure.
Lubrication is a must for band saw blades cutting metal. Never use water as a lubricant or a cleaning agent as it will cause rusting and block the smooth functioning of the blades. A suitable lubricant will be a mix of one measure of High Adhesion Chain Saw Bar oil with half measure of kerosene or diesel. Apply the mix on both sides of the b
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.caseupon.com/article/20139/caseupon-Sharpening-The-Performance-Of-Your-Band-Saw.html">Sharpening The Performance Of Your Band Saw</a>
BB link (for phorums):
[url=http://www.caseupon.com/article/20139/caseupon-Sharpening-The-Performance-Of-Your-Band-Saw.html]Sharpening The Performance Of Your Band Saw[/url]
Related Articles:
12 Irrefutable Cool Work Habits (According to Dogbits)
Making The Bid- No Bid Decision on RFP's
Important Details About Battery Acid Spill Kits for Industrial Plants
Bookmark it:
|