Tags |
|
|
Links |
|
|
Article Check - Seven Steps To Selecting The Right Air Cylinder
A lot of people are thinking that money is difficult to make in vending machines business sales or the profit is not high enough. Actually the sales of the machine greatly depends on its use and where you put it. You will need a business license or a permit in order to put your vending machine on the right location.The start up price for businesses such as in the vending machine field differs depending on the kind of vending machine that will be used. In most cases, people normally start with a single or two small machines like the candy vending machines.These machines are more affordable but they produce a lot of vending machine revenue. You will have to consider the price of the machine and the price of the candy.If you opt for a new bulk vending machine, it will cost you about 300 dollars and a container of jawbrea
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cyli
Lanyards are a very useful invention in our every day lives. If you think about it some of the most simplest conceptions ever made have the greatest impact on our daily lives. Consider the spoon with a fork. They are actually very uncomplicated in design and yet you cannot really live without them (if you're not a caveperson that is).Lanyards are deceptively simple, in fact their very usage is limited only to your imagination. Not only can use them as a neck chain to hold your keys, your wallet, your photo ID, your identification card, or even your grocery list, but did you also know that Lanyards can be used in industry as well? Lanyards are used to carry things beyond everyday conveniences as in the aforementioned such as heavy duty machinery and components.You can even use Lanyards as a marketing pool to help liven up any
How much force do you need to move the object you wish to move?
You'll need to know the weight of the object. Consider what the object being moved is sliding and know that this friction is adding to the load.
Oversize the required force of the cylinder by 25% to take into account friction of the rod and piston seals within the air cylinder itself, and also allowing a safety margin as it relates to the expected load the cylinder will see.
Know your available air pressure (example: 90 PSI) and multiply that times the surface area of the piston inside the cylinder to get the theoretical output force of the cylinder.
If you multiply 3.14 x the radius - in inches -squared this equals the surface area of the piston in square inches.
Since cylinders only come in certain bore sizes, default to the standard cylinder bore that's the next size up if none are exactly the bore diameter calculated. Note that the size of the outside of the cylinder on some types has no real bearing on what the piston diameter inside the cylinder is.
How far do you wish to move the object?
If you wish to move the object five inches, it's logical to think that the cylinder piston / rod travel needs to be five inches. It could be that simple. It might not be. Take into account the size of the object that's to be moved to be sure that the object itself doesn't impact on the cylinder rod cap on retract.
You may wish to consider a cylinder with a longer stroke than required so that the piston of the cylinder can be stopped inside the barrel by having the object itself stop the movement. This stops the piston from "bottoming out" on either cap of the cylinder itself. Depending on the cycle speed, this may increase cylinder life.
Take into account how you are connecting your load to the cylinder rod. If using a clevis of some sort, take that dimension into account. Regardless of what is attached to the end of the rod, the rod itself can only move the distance that the piston inside the cylinder can move. That's all the stroke distance you have to work with.
How will you attach your object to the cylinder rod?
Careful, if you screw the object onto the rod thread directly. Make sure that the "load" and the rod are aligned.
A rod clevis is a "sloppy" connector that screws onto the end of the rod thread. Bolt the other half to your object, and the two halves are connected in the center via a cotter pin of sorts.
This "sloppy" type of connector forgives some misalignment between the rod travel and the object movement for if the object is too far off the axis of the rod, you will very quickly encounter problems with the air cylinder.
There are alignment couplers commercially available that will further absorb misalignment between load and rod. For extreme misalignment cases, the load can be installed on rods external to the cylinder, removing almost all side-load from the rod itself.
Note that there are standards in rod thread size which change depending on the bore size of the cylinder.
Further, the rods themselves can be modified to reduce the size of the thread, to change the type of thread, to make the rod end a female thread, or to replace the standard rod thread with a stud that can, if the stud breaks, be removed and replaced at minimal cost to parts and downtime.
How will you attach the cylinder to your machine?
Depending on the type and size of cylinder there are many options of unique and standard mounts.
Most cylinders come with integral mounting of some sort, whether it's a rod-cap thread, a rear-cap thread, a rear tang for a clevis mount, threaded holes into which bolts can be turned, front or rear flanges, trunnion mounts...and so on. It depends on the type of cylinder.
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cylin
In Part 2 we will discuss phones, monitors, desks and filing systems for our office of the future. So let's get started!Phones and Phone SystemsDoes your phone often find a resting place between your head and your shoulders called the neck. If so, you may discover that using a headset is much more comfortable and productive.You will not have that familiar neck ouch and will have both of your hands free while you are on hold, taking notes from your call or completing another task. This means that you will be more efficient.Employees will be using many more wireless blue tooth headsets and will be able to walk all over the building and keep in touch like they are sitting at their desk. This will enhance their productivity and increase their multi- tasking.Good and not so good because multi-tasking is a bre
How far do you wish to move the object?
If you wish to move the object five inches, it's logical to think that the cylinder piston / rod travel needs to be five inches. It could be that simple. It might not be. Take into account the size of the object that's to be moved to be sure that the object itself doesn't impact on the cylinder rod cap on retract.
You may wish to consider a cylinder with a longer stroke than required so that the piston of the cylinder can be stopped inside the barrel by having the object itself stop the movement. This stops the piston from "bottoming out" on either cap of the cylinder itself. Depending on the cycle speed, this may increase cylinder life.
Take into account how you are connecting your load to the cylinder rod. If using a clevis of some sort, take that dimension into account. Regardless of what is attached to the end of the rod, the rod itself can only move the distance that the piston inside the cylinder can move. That's all the stroke distance you have to work with.
How will you attach your object to the cylinder rod?
Careful, if you screw the object onto the rod thread directly. Make sure that the "load" and the rod are aligned.
A rod clevis is a "sloppy" connector that screws onto the end of the rod thread. Bolt the other half to your object, and the two halves are connected in the center via a cotter pin of sorts.
This "sloppy" type of connector forgives some misalignment between the rod travel and the object movement for if the object is too far off the axis of the rod, you will very quickly encounter problems with the air cylinder.
There are alignment couplers commercially available that will further absorb misalignment between load and rod. For extreme misalignment cases, the load can be installed on rods external to the cylinder, removing almost all side-load from the rod itself.
Note that there are standards in rod thread size which change depending on the bore size of the cylinder.
Further, the rods themselves can be modified to reduce the size of the thread, to change the type of thread, to make the rod end a female thread, or to replace the standard rod thread with a stud that can, if the stud breaks, be removed and replaced at minimal cost to parts and downtime.
How will you attach the cylinder to your machine?
Depending on the type and size of cylinder there are many options of unique and standard mounts.
Most cylinders come with integral mounting of some sort, whether it's a rod-cap thread, a rear-cap thread, a rear tang for a clevis mount, threaded holes into which bolts can be turned, front or rear flanges, trunnion mounts...and so on. It depends on the type of cylinder.
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cyli
Packaging tape is a very important and useful item in the entire process of packaging items. There are many different kinds of packaging tape which are available for use by the customers.Carton sealing tape is used to seal large cardboard cartons. Colored carton sealing tape is often considered to be ideal for identifying inventories, sorting shipments and dating the products. Filament tape is considered to be ideal for bundling tubes, sealing cartons, palletizing, unitizing and repairing. The fiberglass strands give the filament tape tear resistance as well as extra strength for holding heavy loads and packages. The different kinds of filament tape are utility grade filament tape, medium grade filament tape, high grade filament tape, premium grade filament tape and paper backed filament tape.Duct tape is also divided into m
How will you attach your object to the cylinder rod?
Careful, if you screw the object onto the rod thread directly. Make sure that the "load" and the rod are aligned.
A rod clevis is a "sloppy" connector that screws onto the end of the rod thread. Bolt the other half to your object, and the two halves are connected in the center via a cotter pin of sorts.
This "sloppy" type of connector forgives some misalignment between the rod travel and the object movement for if the object is too far off the axis of the rod, you will very quickly encounter problems with the air cylinder.
There are alignment couplers commercially available that will further absorb misalignment between load and rod. For extreme misalignment cases, the load can be installed on rods external to the cylinder, removing almost all side-load from the rod itself.
Note that there are standards in rod thread size which change depending on the bore size of the cylinder.
Further, the rods themselves can be modified to reduce the size of the thread, to change the type of thread, to make the rod end a female thread, or to replace the standard rod thread with a stud that can, if the stud breaks, be removed and replaced at minimal cost to parts and downtime.
How will you attach the cylinder to your machine?
Depending on the type and size of cylinder there are many options of unique and standard mounts.
Most cylinders come with integral mounting of some sort, whether it's a rod-cap thread, a rear-cap thread, a rear tang for a clevis mount, threaded holes into which bolts can be turned, front or rear flanges, trunnion mounts...and so on. It depends on the type of cylinder.
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cyli
Deciding which small business to invest in is only part of the equation. The first and most important step is finding a business that's right for your personality, which has a direct effect on your entrepreneur style and how successful you will be with your business.Determining your entrepreneur style requires that you take an honest look at your business skills and motives for starting your business. For example, if you don't like social settings and aren't comfortable speaking with people, it's not a good idea to invest in a company that requires constant face to face interaction with the buyer. Some companies to consider starting if you fall in this category may be housekeeping, commercial window washing, lawn care and even janitorial services.If, on the other hand, you enjoy networking and speaking to others, direct s
Note that there are standards in rod thread size which change depending on the bore size of the cylinder.
Further, the rods themselves can be modified to reduce the size of the thread, to change the type of thread, to make the rod end a female thread, or to replace the standard rod thread with a stud that can, if the stud breaks, be removed and replaced at minimal cost to parts and downtime.
How will you attach the cylinder to your machine?
Depending on the type and size of cylinder there are many options of unique and standard mounts.
Most cylinders come with integral mounting of some sort, whether it's a rod-cap thread, a rear-cap thread, a rear tang for a clevis mount, threaded holes into which bolts can be turned, front or rear flanges, trunnion mounts...and so on. It depends on the type of cylinder.
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cyli
I would like to say that, the biggest room in the world is the room for improvement. I believe everyone wants to constantly improve. I believe each one of us is created as perfection; however, the results we create are excellent, so there is lots of room for improvement in what we do. The associates I hired in my bicycle and lawnmower shop like myself, were never perfect; however, they were excellent. Working with them as they improved taught me new ways to show forgiveness, understanding, and patience.My first employee was in a wheelchair from an auto accident that happened when he was sixteen. I hired him to answer the telephone and talk to customers who came into the store. My second employee had one arm. Word spread that I hired people with physical challenges. The placement officer at a local community college with a rehabili
Remember, if the load that's being moved is not aligned with the rod travel, you will have problems. Therefore, the type and location of load will help determine the type of cylinder mount too.
What type of cylinder?
Some choices are:
Usually, as the bore size of the cylinder gets larger the style opted for is a repairable type, as more money will be spent on acquiring the cylinder therefore the cost for repair becomes a smaller percentage of the overall cost. It's hard to get excited about trying to fix a $80.00 cylinder when the parts cost $30.00 and it will take a worker two hours to fix it. On the other hand, if the cylinder costs $500.00 - a different story.
As the bore size of the cylinder changes, so too will the rod diameter and rod threads, and the port sizes.
NFPA cylinders are imperial dimensions and imperial threads, ISO cylinders are metric dimensions and threads.
You need to consider the conditions into which the cylinder will be installed to determine if you need specialty materials in their construction. Also, specialty seals may be required in corrosive, low or high heat environments.
Cushions?
As referred to earlier, if you can avoid stopping the cylinder by having the piston "bottom out" inside the barrel, good. This will increase cylinder life. If this isn't practical, your cylinder caps can usually have cushion vents installed which, when adjusted, trap and slow the exhaust of a small amount of air from inside the cylinder as the piston reaches end of stroke. This provides a cushion to lessen the impact of the piston to the end cap.
Where is it?
If the application requires knowledge of load position, proximity sensing devices can usually be added to the barrel of the cylinder. They will "make" when a magnet on the piston inside the cylinder passes them. Since the distance from the magnet to end-of-rod is known, this will locate the load.
There are a variety of position sensing options for cylinders including reed switches, hall effect switches, linear potentiometers, or you can elect to sense the position of the load itself by using a barrel proximity switch mounted so that the switch "makes" as the load itself arrives.
If you need position sensing, make sure the cylinder you choose has that capability both in terms of magnets on the piston, and external mounts for the switch itself.
And there you have it - six steps to finding the right cylinder. Good luck in your hunt.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.caseupon.com/article/3261/caseupon-Seven-Steps-To-Selecting-The-Right-Air-Cylinder.html">Seven Steps To Selecting The Right Air Cylinder</a>
BB link (for phorums):
[url=http://www.caseupon.com/article/3261/caseupon-Seven-Steps-To-Selecting-The-Right-Air-Cylinder.html]Seven Steps To Selecting The Right Air Cylinder[/url]
Related Articles:
Global Domains International or GDI - More Than Just Web Hosting
S Corporation - A Federal Tax Hybrid Entity
Bookmark it:
|